Wireless Reader: Charging
When you are reading codes with your wireless reader, blinking red status indicators will indicate a low battery. As the battery discharges, the blink frequency increases. A blinking red status indicator indicates low battery or thermal shutdown mode.
You can also check the status of the battery in the DataMan Setup Tool.
Place the reader on the base station for charging. Make sure that the pins at the end of the handle make contact with the pins in the base station.
|
|
|
|
Paired Reader Charging | Paired Reader Fully Charged |
Refer to the following table for a summary of indicators regarding charging:
Condition | Status Indicator: Reader | Status Indicator: Base Station |
---|---|---|
Battery low | flashing red indicators |
steady blue, indicating connection flashing blue, indicating data transfer |
Reader is charging in the base station | steady red indicators |
steady green, indicating connection flashing green, indicating data transfer |
Reader is fully charged in the base station | steady green indicators |
steady green, indicating connection flashing green, indicating data transfer |